FAQ™ 202 Anti-Aging 7 Colors+NIR Silicone LED Face Mask represents an entirely new generation of LED masks – ultra-lightweight, wireless, and made with flexi-fit silicone to mold to your facial contours for even light coverage. It features eight different wavelengths, including near-infrared (NIR), to tackle signs of aging and other skin concerns – while you do literally anything else. 

FAQ™ 202 Silicone LED Mask uses clinical technologies to give you clinical anti-aging results – while you walk around freely and get on with your day. It’s proven to reduce wrinkles and improve firmness and elasticity in only two weeks. All of this – at the push of a button.

 

Simple to Use

In order to use FAQ™ 202 Silicone LED Mask, you must first unlock it. You can do this automatically by registering your device via the FAQ™ Swiss app for the first time.

STEP 1

Start with a clean and dry face, and apply your FAQ™ primer, if desired. Then place your FAQ™ 202 Silicone LED Face Mask over your face and secure it in place with the headband.

A model putting on FAQ 202 LED face mask

 

STEP 2

Press the universal button to turn on your mask. You can change the LED colors by quickly pressing the button again. You can access more settings and pre-programmed treatments via the FAQ™ Swiss app.

A model pressing the button on FAQ 202 face mask to turn it on

 

STEP 3

Enjoy your LED facial treatment for up to 15 mins while you continue with your day – for multitasking at its best. Once finished, press the universal button for 3 seconds to turn off your mask.

A model using the FAQ 202 LED face mask while reading a magazine

 

Recommended use is 5-15 minutes, 3-5 times weekly.

Caution: Do not pull the headband too tight, or you may damage the silicone mask. 

 

What Makes It Unique?

  • 8 LED wavelengths tackle advanced signs of aging, hyperpigmentation, and dullness – FAQ™ 202 is clinically proven to decrease wrinkles by 32% and significantly improve firmness and elasticity in just two weeks.
  • Six hundred points of light placed in optimal locations ensure even light coverage – the engineers at FAQ™ Swiss scanned over 10,000 faces to develop the first LED mask that perfectly fits every face.
  • Flexi-fit silicone molds to the face like a transparent second skin.
  • Ultra-lightweight, wireless & open eye design with non-slip headband make it easy to move around.
  • Pre-set treatments for specific skin concerns are available on the FAQ™ Swiss app.

 

Cleaning Your FAQ™ 202

Always clean your FAQ™ 202 Silicone LED Mask thoroughly after use. We recommend spraying the mask with FAQ™ Silicone Cleaning Spray for optimal results. Then, wet a lint-free cloth or towel with warm water and thoroughly wipe off all remaining residue. NOTE: Never use cleaning products containing alcohol, petrol, or acetone, as they may irritate the skin and damage the silicone.

 

Charging & Storage

Your FAQ™ 202 Silicone LED Face Mask lasts for up to 2 hours on a full 2-hour charge. If the battery is running low, your mask will blink three times and then turn off. The box your FAQ™ Silicone LED Face Mask comes in can convert into a display case for when you’re not using the mask by propping up the inner base of the box. Not only does it showcase your mask beautifully, but it also allows easy charging. Simply ensure the charging port on the diamond is aligned with the hole in the face mold display. Then, plug in the USB charging cable from the back.